SPLINED SHAFTS AND SLEEVES
PRODUCT SPECS & PHOTOS
Plain Sleeves
Our range of plain splined sleeves are weldable and are supplied in a zinc coated finish for corrosion resistance. They can be used as they are or you can further modify them to suit your needs.
| SPLINED SLEEVES – PLAIN |
|||
| PART NO | I.D mm |
O.D. mm | LENGTH mm |
| AL00772 | 13/8′ Z6 | 48 mm | 130 mm |
| AL00177 | 13/4″ Z6 | 60 mm | 100 mm |
| AL01692 | 13/4″ Z20 | 63 mm | 100 mm |
| AL00178 | 13/8″ Z21 | 48 mm | 100 mm |
| AL00291 | 25mm Keyed | 49 mm | 60 mm |
AL00291 25mm Plain bore sleeve.
8mm Keyway. 4 x M8 tapped holes.
Clamp Bolt Sleeves
Our range of splined sleeves with interfering clamp bolts are weldable and feature a heavy duty twin bolt external clamp allowing for a strong / positive attachment to your equipment to prevent movement and wear during operation.
| SPLINED SLEEVES – INTERFERING CLAMP BOLT | |||
| PART No | SPLINE | O.D mm | LENGTH mm |
| AL00293 | 13/8″ Z21 | 50 | 100 |
| AL00297 | 13/8″ Z6 | 50 | 100 |
| AL00298 | 13/4″ Z6 | 63.5 | 100 |
| AL00299 | 13/4″ Z20 | 63.5 | 100 |
SPLINED SHAFT
A range of agricultural splined shaft is held in stock.
This includes fully splined shafting and single splined shafts.
See details below.
| SPLINED SHAFTS – FULL LENGTH SPLINE | ||
| PART NO | SPLINE | LENGTH mm |
| AL00777 | 13/8″ Z6 | 500 |
| AL00776 | 13/8″ Z6 | 1000 |
| AL00778 | 13/8″ Z6 | 3000 |
| AL01897 | 1 3/8″ Z21 | 200 |
| AL00770 | 13/4″ Z6 | 500 |
| AL00779 | 13/4″ Z6 | 1000 |
| AL00782 | 13/4″ Z6 | 3000 |
| AL00780 | 13/4″ Z20 | 600 |
Below: P/No AL01897
13/8Z21 x 200mm splined shaft
| SPLINED SHAFTS – SINGLE OR DOUBLE ENDED | ||||
| PART No | O/A LENGTH MM | DIAMETER | SPLINE | ENDS |
| AL00775 | 600 | 13/8″ | 13/8″ Z6 | ONE |
| AL00771 | 2400 | 40mm | 13/8″Z6 | BOTH |
AL00775 shown below is a single ended splined shaft that can be used to suit many applications. AL00775 is a stocked size.
Other shafts can be made to order with spline at one or both ends.
When ordering single or double end splined shafts please confirm:
1. Overall Length.
2. Shaft diameter
3. Single or double end spline.
4. Spline. 13/8Z6, 13/8Z21,13/4Z20 or 13/4Z6
5. Material. Standard = Grade 1045 . Optional 4140 High Tensile.
